Tyre Jump Frame Only - Break Apart Hoop additional

Constructed to dispense with side braces and to be fully demountable. The frame is designed to suit the 600 mm diameter ‘hoop’ with little additional clearance, thus reducing the risk of dogs attempting to jump between the ‘hoop’ and the frame. The frame comes apart and is storable in a minimal space. Hoop is made from 100 mm slotted drain ('ag pipe')

Jump Sets with fixed base – Fixed bar supports
Note all heights are set for 32mm OD bars.

The jumps are constructed of 2 self supporting uprights (1200mm) with inward facing bar supports at 200, 300, 400, 500, 600 mm to allow easy change of height. 1 bar supplied (un-taped).

Jump Sets with fixed base – Sliding bar supports
Note all heights are set for 32mm OD bars.

The jumps are constructed of 2 self supporting uprights (1200mm) with inward facing bar supports fitted to a slide to allow variable change of height. 1 bar supplied (un-taped).

Note: Variations are also available as shown with removable and stackable bases and uprights: Please contact for prices.

Single Jump Bars/ Weaver poles (not Taped)

1200 X 32 mm (OD) White PVC bars.

Spread Hurdle . Note all heights are set for 32mm OD bars.

Each side section is self supporting with inward facing bar supports spaces at ANKC 2006 standards. Height is simply and quickly adjusted by relocating the jump bars to each of the matching bar supports. 2 bars supplied (un-taped).